Crane and Lifting System: Mistakes to Avoid

As the main tool of a construction site, the crane symbolizes an excellent economic activity of a city. Its use is unavoidable if you are planning any construction work. Here are mistakes to avoid regarding its handling.

Mistake #1: Not Knowing How a Crane Works

Usually, a crane moves prefabricated elements. It is also used to pour concrete. It can lift tons of concrete mixers up to 40 meters. The crane allows for cinematic shots such as a bird’s eye view for those who like to shoot at heights. Strict stability rules lead to such a performance, a balance that depends on the configuration of this giant scale. Concrete counterweights keep it fixed to the ground. The steel mast is made up of elements depending on the desired height. The cockpit is installed at its end. At the front, you will see a boom on which the cart moves, connected to the lifting hook. At the back, the counter boom is equipped with counterweights. The speed of the boom is adjusted according to the load.

Mistake #2: Ignoring the Characteristics of the Machine

Even if it is reserved for heavy loads, the crane’s capacities are limited. Regarding its length, it has 2 to 4 extensions. The longer it is, the more practical it is. If it is too long, it can also increase the risk of accidents. For example, three-extension cranes are used in urban construction sites. Another important factor is its power and lifting capacity. A longer crane has much more lifting capacity, which is expressed in tons. meter ™. Theoretically, if you need a clamshell loaded with 1200 t of sand, gravel, concrete, you can choose the 19 t.m cranes with 3 extensions. With a crane with 2 extensions, the maximum load does not exceed 12t.m.

Mistake #3: Not Having the Necessary Expertise

Another common rigging error occurs when an incompetent person lifts a load. If you don’t know what task to perform, it’s best to ask around first. Potential and actual hazards can occur. Even experienced workers can make mistakes. If you don’t have the necessary skills, you can get training from institutions. Even if moving, lifting, or lowering a load seems like a game to you, these movements require qualified engineers. As soon as you have received training and certifications, you can perform the tasks safely. In addition, their performance is regulated by laws.

Machinery, Growth, Métal, Ville, Work, Hoisting
Machinery, Growth, Hoisting

Mistake #4: Not Inspecting the Equipment

To find out the condition of your equipment, you need certified inspectors who will make honest and accurate assessments. This involves identifying hazards to make improvements and recommendations. Repairs accompany the inspection. Inspectors test your crane equipment and will issue a certificate of compliance with provincial and national safety regulations.

Mistake #6: Not Checking the Weather

Wind can become a crane’s enemy. You will need to assess the wind speed. If it exceeds 71 kilometers per hour, the crane should be stopped and placed in the wind vane position. It could easily collapse due to bad weather. Be sure to check the weather before you start work.

Mistake #6: Not Hiring a Professional

The handling of the crane and lifting system can quickly turn into a nightmare if you do not respect the rules of good practice. Do you want to get your construction work done faster? Do you want to lift industrial machinery or heavy objects? Hiring professional lifting services will be the best option to prevent incidents or injuries in your workplace, home, or any other place where you are lifting, moving, or pulling. You will have complete peace of mind along with increased productivity.

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *