Concrete Pump: How To Use It Efficiently?

Technological advances in recent years have provided builders with powerful tools. One of these tools is the concrete pump, which plays a crucial role in pouring concrete. This device is not always used as it should be. So, without further ado, let’s dive into this blog and learn about how to use a concrete pump effectively.

What is a concrete pump?

concrete

Very often used on construction sites, the concrete pump is an essential and necessary piece of equipment in the building industry. Its role is to pump and transport the concrete through a pipe to the formwork site. It is an important ally of concrete pumping specialists.

Concrete pumps exist in several forms depending on the application planned by the manufacturer for his product. Indeed, each type of concrete pump is adapted to a given type of situation. The concrete pump is a useful and important tool that is worth its price. The average purchase price of a concrete pump is between 2500 and 5000 dollars.

What are the different types of concrete pumps that exist?

There are three different types of concrete pumps. The choice of the most suitable one for a job site depends on the work to be done. To make the right choice for your work, please ask the advice of construction professionals. They will tell you which of the three best suits your site’s needs.

Pump trucks

Still called mobile pumps, this type of pump is designed for large construction sites. They are equipped with a propulsion engine and are very agile.

Stationary pumps

These are machines designed to be installed on large-scale construction sites. They often do not have a drive motor but can be equipped with pneumatic wheels or a track.

The pump mixer

This is a pumping arm that is attached to a truck. It has a boom and is more suitable for small sites.

What are the characteristics of a concrete pump?

The concrete pump is equipped with several elements that characterize it. A mobile pump is 4 m high, 10 m long, and 4 m wide. It has between 4 and 8 m of stabilizing cylinders. The model’s pumping capacity can range from 100 to 200 m3 per hour. The stationary concrete pump has an average output of 80 m3 per hour. On the other hand, the mixer is equipped with a boom and has a flow rate ranging from 20 to 60 m3. In general, a concrete pump consists of :

    • A pump is responsible for pouring the concrete. It is equipped with rotors or pistons.
    • A hydraulic unit that powers and turns the entire mechanism of the machine.
    • A boom that can be operated by remote control and can rotate 360°.
    • A stabilizer that varies in size and position depending on the distribution boom.

How to make good use of a concrete pump?

The most important thing to do to enjoy the services of a concrete pump and keep it in good condition is to follow the manufacturer’s instructions. It should also be used only for the work for which it is suitable. Often, a concrete pump equipped with pistons is better suited for consistent concrete, while a peristaltic pump is used for light concrete. The operating principle and flow rate of each type of concrete pump must also be respected; otherwise, the machine will wear out.

Final thoughts

concrete

In short, the concrete pump exists in three different forms. To use it properly, you must take into account its type and capacity. And always follow the manufacturer’s recommendations. Sound off in the comments section below, and tell us what you want to read next and if you want to read more about concrete pumps.

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *